Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3161
    Frank CrawfordFrank Crawford
    Participant

    Hello Roger – Sorry for the delay, the system normally sends me an email telling me some has a question here. Are you looking for the cannulas with tubing or do you need the flowmeter / needle valve with it? Also, I do get email at support@mooney.com

    Thank You, Frank Crawford

    #3162
    Frank CrawfordFrank Crawford
    Participant

    Here is Part number 027N0001-1 – Cannula Oximizer kit

    Attachments:
    You must be logged in to view attached files.
    #3191
    Roger PohlnerRoger Pohlner
    Participant

    Hello Frank, thank you for responding to my question. The good folks at Precise Flight were very helpful and fixed me up with everything I needed. Thanks again for your expert help and advice!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.